Nixie Tube Clock

Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES

Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES
Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES

Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES    Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES

Assembled board for Nixie Clock on IN-18 large Nixie tubes. Project "Divergence Meter" has modular system, so you can build clock with 4 or 6 or 8 tubes. For clock with 6 tubes you need one MCU board NCM107 and Tubes board NCT318, for 8 tubes you need additinal one tubes board NCT818. To get clock on 4 tubes You can cut tubes PCB along the line, see photo below.

PCB design, schematic, housing and software made by GRA & AFCH. Set includes fully assembled board(s), MCU (microcontroller unit) ATmega328P flashed with Arduino Uno Bootloader and sketch (Firmware). Kit compatible with Arduino Uno, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on. Github at the "NixeClock" repository.

This lot contains assembled boards and flashed microcontroller (ATmega328P) but does not include tubes and power supply. 1 pc of assembled Tubes boards (optional in selector on top of screen).

Flashed MCU with Arduino bootloader and NixieClock sketch firmware. User manual on vintage-style paper. The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s).

If you have ANY questions, PLEASE ASK us. Clock support many kinds of Nixie tubes (4 tubes [hh:mm], 6 tubes [hh:mm:ss] and 8 tubes [hh:mm:ss:uu/Temp]). Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on.

As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within.

Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Shematic that prevent "blue spot" effect inside IN-18 tubes.

Integrated High Voltage Power supply 150 - 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).

Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. 2 dots column with separate controls upper and lower dots.

Power consumption: 12V, 1000mA (Recommended power source: voltage 12V, current 1-2A). MCU board NCM107 has world smallest size: 100 x 50mm. Tubes board NCT318 size: 264 x 50mm.

Tubes board NCT818 size: 94 x 50mm. Content description (depending of selector). 6xTubes PCBA for IN-18 listing includes. 1pc - Assembled tubes board NCT318 (without tubes). This board support 6pcs of IN-18 tubes and comes with 2 neon lamps IN-3 or 2x glass columns with NE-2H lamps inside.

1pc - Assembled MCU board NCM107. This is main board with flashed microcontroller unit Atmega328 and other electronics parts. It is a multipurpose board that support any tubes boards 3xx and 4xx series made by GRA & AFCH. 8xTubes PCBA for IN-18 listing includes. 1pc - Assembled tubes board NCT818 (without tubes).

This board support 2pcs of IN-18 tubes and comes with 2 neon lamps IN-3 or 2x glass columns with NE-2H lamps inside. This board can't be used as standalone tubes baord and can be connected only to NCT318 board.

Set of metall hex spacers. 1pc - User Manual on vintage style paper. Nixie tubes and power supply is NOT included on any variations! The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IV-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s). Example of Assembled MCU PCB Top side. Example of Assembled MCU PCB Bottom side. Assembled MCU board top side chart. Assembled MCU board bottom side. Actual photos of tubes PCBs.

Tubes board NCT318 can be cutted to get clock on 4 tubes. Additinal tubes board NCT818 to get clock on 8 tubes. Boards Dimensions in 2D and 3D. MCU board NCM107 PCB Top view.

MCU board NCM107 PCB Bottom. Tubes board NCT318 in 3D. Dimensions of NCM107 in 2D. Example of using this boards. MCU board NCM107 with NCT318.

MCU board NCM107 + NCT318 with glass columns. MCU board NCM107 and NCT318 with additional NCT818 board. MCU board NCM107 + NCT318+ NCT818 and glass columns. Example of assembled clock (without case).

See our video presentation of Large Nixie Clock IN-18 by GRA & AFCH. After payments received and verified. The item "Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES" is in sale since Monday, February 6, 2017.

This item is in the category "Crafts\Other Crafts". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk.

This item can be shipped worldwide.

  • Model: Divergence Meter
  • Country/Region of Manufacture: Ukraine
  • MPN: Does Not Apply
  • Brand: GRA & AFCH


Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES    Nixie Tubes Clock IN-18 PCB Assembled For 4, 6, 8 Tubes, DIY, Arduino NO TUBES