IN-18 Nixie Tubes - 6 pcs (optional). IN-3 Neon lamps - 2 pcs (1 additional spare). GPS, Temp sensor, Remote - optional. Set of hex spacers and screws. User manual on vintage-style paper.Easy to build beautiful clock - we offer housing. A special socket for each pin IN-18 - Easy to change tubes. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware always available on GitHub.
No need to download drivers - we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of Printed Circuit Boards.
If you have ANY questions. Shiled support 6 IN-18 Nixie tubes [hh:mm:ss]. Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included). Operation via IR remote control (Remote control Sony RM-X151, not included).No need refresh or update information on the tubes. The maximum possible brightness of the tubes. Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors.
Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test.Integrated High Voltage Power supply: 150 - 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. RTC (Real Time Clock) with Backup battery. 3 buttons on board to control. Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with "Tone" library).
8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside. Separate controls upper and lower dots.
Recommended: 12V, 1-2A (center pin positive +). Nixie Tubes Shiled NCS318 PCB size: 264 mm x 90 mm x 53 mm. Nixie Tubes Clock Arduino Shiled NCS318 - gallery.If you have ANY questions, PLEASE ASK us. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios".
The seller is "gra_and_afch_2" and is located in this country: UA. This item can be shipped worldwide.