Nixie Clocks are one of the most beautiful and popular Vintage Clocks. Clock features Startup Tune, RGB backlight, USB port for updates. Nixie features Sockets and options include Tubes, Power Supply. Plugable Accessories include compact external Temperature sensor. Nixie Clock is fully compatible with Arduino platform program codes.
It allows you to write your own uniqe programs for the Arduino platform. All the latest Source codes are always available on our GitHub channel. PCB, Design, Schematics, Case and Software made by GRA & AFCH. Nixie Tubes Clock with Sockets on Acrylic Stand (NCT412-4+NCM109 Boards). IN-12 Nixie Tubes - 4 pcs Set (included with the Clock).
User Manual on Vintage style paper. Nixie Board features Sockets for Nixie Tubes. Clear Acrylic Stand included with the Clock. Power Supply is NOT included with the Clock. If you have ANY questions, PLEASE ASK us. Listing contains assembled boards, flashed microcontroller (ATmega328P). Nixie Tubes and Acrylic Stand. We also offer Temperature sensor for this Clock. The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s). 4 tubes clock available only on IN-18 (NCT218 boards), ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M series (NCT566 boards).Clock support many kinds of Nixie tubes (6 tubes [hh:mm:ss] format and 4 tubes [hh:mm]). Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.
(included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test.Integrated High Voltage Power supply 150 - 220V. ICSP connector for flashing Arduino Bootloader to blank MCU. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.
It can be disabled in the menu (see manual). Test points for testing, adjust and control low and high voltage circuits.
Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector.
Terminals for external and internal buzzer. 2 dots column with separate controls upper and lower dots. Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A). MCU board NCM107 has world smallest size: 100mmx50mm.
Tubes board NCT412-4 size: 130 mm x 50 mm. A special Socket for each pin of IN-12 - easy to change Tubes. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware always available on GitHub. No need to download drivers - we are use only Genuine USB to serial converters (FTDI FT230). Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Very high qualty of Printed Circuit Boards. We offer Acrylic Stand for the Clock.
IN-12 Nixie Tubes Clock on a Clear Acrylic Stand.