Nixie Tube Clock

Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F

Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F
Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F

Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F  Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F

NIXIE TUBE IN-14 CLOCK KIT UNSOLDERED. You will receive unsoldered disassembled kit. You can assemble it WITHOUT glue!

We came up with a unique and minimalistic design, also please note that we use the most premium body materials (unlike suspicious analogs that have appeared on the market) and the best in14 tubes (NOT z570, NOT z573, NOT in8), they are distinguished by the clearest, brightest and long-lasting glow. Therefore, our Kit will be the best gift for you or your friends? The Kit includes a power supply.

But you can use this product with any power adapter not exceeding 5V. This set is very easy to assemble and uses a minimum of parts. Thanks to the video instructions, even a person who first picks up a soldering iron can solder it. The listing contains PCB board, full set of electronics parts, wooden parts, power supply and Arduino NANO.

You will receive programmed Arduino NANO. Clock displays time in HH:MM format (12 hours).

Numbers turning modes (No effect, smooth transition through fading, number rewind, cathode rewind, "Train", "Rubber"). Night mode from 23:00 till 7:00 (the light of the lamps is much softer). The clock runs correctly even after a power outage. Also you can enable / disable "glitches mode" which looks stylish and vintage.

Arduino NANO - 1 pc. PCB board - 2 pcs. Mini RTC DS3231 - 1 pc. PBS-40 and PLS-40 - 1 pc. Capacitor 350 V 4,7 uF - 1 pc.

Resistor 470 kOhm - 1 pc. Inductor 220 uH 240 mA - 2 pcs. Diode HER106 - 1 pc.

Transistor IRF840PBF - 1 pc. Optocoupler TLP627(F) DIP-4 - 6 pcs (1 spare pcs). Decoder K155ID1 - 1 pcs.

Light-emitting diode - 4 blue pcs. Neon dot - 1 pc.

Resistor 100 Ohm 0,25 W - 4 pcs (1 spare pc). Resistor 200 kOhm 0,25 W - 2 pcs (1 spare pc). Resistor 470 Ohm 0,25 W - 2 pcs (1 spare pc). Resistor 10 kOhm 0,25 W - 2 pcs (1 spare pc). IN-14 tubes - 4 pcs.

40 cm of 1.5 mm wire - 1 pc. Electrolytic capacitor 10 V 470 uF - 1 pc. Wooden enclosure parts - 1 pc. We will reply within 15 minutes.

Our working hours: 8:00 - 18:00 (Eastern Standard Time) seven days a week. We check all items before sending out. All products are brand new, never been used or refurbished. This item is in the category "Home & Garden\Home Décor\Clocks\Desk, Mantel & Shelf Clocks". The seller is "poltava_workshop" and is located in this country: UA.

This item can be shipped worldwide.

  • Brand: Unbranded
  • Type: Desk Clock
  • Character: Clocking


Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F  Nixie Clock Kit IN14 (With tubes) and Wooden Enclosure. 12 H. F