Product Description: IN-12 Nixie tube fluorescent digital clock with 225 colors of light showing time and date Specification: Name: IN12 Nixie tube clock Style: Without Tubes, With Tubes (optional) Working voltage: DC 5V (USB-C interface) Material: high-grade acrylic Tube model: IN12 Size: 11.54.54.5cm feature: 1. Time display: hours, minutes and seconds time display. Date display: year, month, day date display. High-precision clock: Built-in high-precision clock chip, the annual error is less than 1 minute.
Power-off memory: Power failure or shutdown does not affect the clock timing. No need to reset the time after power-on or startup. Infrared remote control: Use the matching infrared remote control to set up. Anti-poisoning procedures: When the cathode is ignited, some substances will be radiated outward and deposited on other unignited cathodes, normal glow discharge.Under normal circumstances, if each cathode is lit in cycles and the lighting time is similar, the life of the lamp will be longer. Therefore, an anti-poisoning program is added to light the cathode at intervals to extend the life of the lamp.
Low power consumption: Using high-efficiency power supply, the power consumption is controlled at about 1W. Instruct: Button corresponding functions: CH-: on/off Previous article: Switch the color of the bottom ambient light EQ: Enter setting time mode 1: Minutes and seconds display mode 2: Hour, minute mode 3: Display month and date 4: Display year 5: Test the Nixie Tube Time setting : 1.
Press EQ, the Nixie tube at the minute position starts to flash and enters the time setting mode. You can change the value by pressing + or. Continue pressing EQ to set the next item.
The sequ ence is minute-hour-day-month-year, and finally press EQ to exit the setting mode. Press the 6 key, the Nixie tube starts to flash. Set the minutes, use + or - to change the value, then press the 6 key to set the hour. After the setting is completed, press the 6 key again to exit the setting and timing mode. Press key 7, the Nixie tube starts to flash.
Set the minutes, use + or - to change the value, then press key 7 to set the hour. After the setting is completed, press key 7 again to exit the set timer shutdown mode.
The default is 00:00, which means turning off the timer switch, so if you want to set the 00:00 switch, please set it to 23:59 or 00:01. Set the brightness and mode of the ambient light: 1. Press button 9, the Nixie tube starts to flash, use + or - to change the value, 00 is the breathing light mode, 01 is the spectrum cycle mode, then press the number 9, the left Nixie tube starts to flash, use + or - to change the atmosphere The brightness of the light, 0 means turning off the backlight.
In non-setting mode, use NEXT to change the color of the bottom ambient light. The 255-color version can be changed by long pressing.
Set the anti-poison execution interval: Press button 8 to enter the anti-poison execution time interval setting, press + or - to set, and press button 2 to exit after setting is completed. Package Included: 1 x Nixie tube clock 1 x power cord Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions.