IN-18 Arduino Shield NCS318 Raspberry Pi HAT Nixie Tubes Clock with Columns and Sockets with Adapter and Power Supply. Arduino Shield/Adapter/Raspberry Pi Nixie Clock with Columns.
Designed for 6 IN-18 xUSSR Nixie Tubes with Sockets. IN-18 Tubes are the most popular mass-produced Nixie Tubes. Nixie Clocks are one of the most beautiful and popular Vintage Clocks.
Clock features Startup Tune, RGB backlight, USB port for updates. Options include Tubes, Columns, Raspberry Pi, Power Supply. Sensor, GPS Receiver, IR Remote. Clock features Adapter from Arduino Shield to Raspberry Pi Board.Shield Board is designed for Arduino UNO and MEGA 2560 Boards. It allows you to write your own uniqe programs for the Arduino platform. All the latest Source codes are always available on our GitHub channel.
PCB, Design, Schematics, Case and Software made by GRA & AFCH. IN-18 Arduino Shield with Adapter Raspberry Pi HAT Nixie Tubes Clock with Columns and Sockets. Shield Board with Sockets (NCS318). IN-18 Nixie Tubes 6 pcs Set.
Columns with NE2H Dots - 2 pcs. Adapter from Raspberry Pi to Arduino Shield. Power Supply (12V, 1A) (US, EU, UK, AU).
User Manual on a Vintage style paper. If you have ANY questions. Easy to customize firmware under Your own needs, thanks to an open platform Raspberry Pi/ Arduino. The latest version of the firmware is always available on GitHub. Very high qualty of PCB.
6 digits IN-18 Nixie tubes [hh:mm:ss]. Time synchronization via the Internet. The maximum possible brightness of the tubes. Automatic update information on the tubes. Unique RGB LED backlight with 16,7 million colors.
Integrated adjustable High Voltage Power supply: 150 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits.
Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control.
IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA works fluently. Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside.
Separate controls upper and lower dots. Power consumption: 11-14 VDC, 750 mA.Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive +). Nixie Tubes Clock Shield NCS318 IN-18 size: 264(L) x 90(H) x 53(W) mm. IN-18 Arduino Shield NCS318 Raspberry Pi HAT Nixie Tubes Clock. Raspberry Pi to Arduino Shield adapter. The item "IN-18 SHIELD NCS318 RASPBERRY PI HAT or ARDUINO NIXIE CLOCK WITH OPTIONS" is in sale since Friday, September 11, 2020. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in Dnepr.
This item can be shipped worldwide.