IN-3 Neon lamps in Columns - 4 pcs. Set of hex spacers and screws. User manual on vintage-style paper.This listing does NOT contain the TUBES, Arduino board, GPS, Remote and Power Supply. All Accessories are available below. And upload software into your arduino. Ideo tutorial: on our channel. Easy to build beautiful clock - we also offer Clock case in two versions: economic Acrylic case and outstanding Wooden case. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino. The latest version of the firmware is always available on GitHub. No need for additional drivers- we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.
Very high qualty of PCB. If you have ANY questions. 6 digits IN-18 Nixie Tubes [hh:mm:ss]. Date format: DD:MM:YY.
The maximum possible brightness of the tubes. Slot Machine Anti poisoning - tubes saving function. Temperature display [Celsius or Fahrenheit] (optional, choose in selector). GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector). IR remote controls (Remote control model Sony RM-X151/RM-X153, optional, choose in selector).IR protocol SIRC or any protocol if you able to implement it. Automatic update information on the tubes.
Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.
(included songs: Mission Impossible, We Wish You. Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound.You can check firmware version at the end. Unique detailed tube test - our soft check each segment on every lamp. Distinguishable to see segement failure. Integrated adjustable High Voltage Power supply: 150 - 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits. Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control. IR Reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with "Tone" library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA - works fluently.
Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside.
Separate controls upper and lower dots. Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive "+").
Nixie Tubes Clock Shield NCS318 size: 264(L) x 90(H) x 53(W) mm. Arduino Nixie Tubes Clock Shield NCS318. After payments received and verified. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios".
The seller is "gra_and_afch" and is located in this country: UA. This item can be shipped worldwide.