Version for manual assembling Sonya clock. I will give you electrical scheme and many photos of.
If this kit will be assembled properly, it is will work! Wooden (oak-tree, polished and varnished) case or 4mm plastic case. Increase lifetime of tubes in twice! Countdown timer 99days:23hour:59mins:59sec.Led glow independent random color leds and. Led (6 colors of backlight or autochange color mode). 10 modes of switch digits. 2 modes of separator tubes.
6x Russian chips K155ID1 in sockets. Data is not lost when power off. 3 button - Time, Alarm, Color. Power source - DC 12V barrel plug 5.5mm/2.1mm ("+" inside, "-" outside). Consuming current - no more 500mA.
Dimensions of the clock in case. 156mm x 85mm x 66mm.
Next effect of switch time. Change brightness of top LEDs. Change color of top LEDs. 0 - 12h time format. 1 - 24h time format.
1 - soft mode 1. 2 - soft mode 2. 3 - random mode 1. 4 - random mode 2.
9 all effects one by one. 0 - all leds off.
1 - every 2 minutes. 2 - every 5 minutes. Bigger value - slowly clock. 0 for IV-9 Numitron clock.
1 for IN-4, IN-14, IN-8, IN-16 and IN-18 nixie clocks. 1x PCB with preprogrammed chips.
1x plastic or wooden case(optional). 1x Universal 12V, 1A power supply(EU, UK or US plug). 2 months after received the item. Any claim should be made within 60 days after received the item. The item "DIY KIT SONYA NIXIE IN-4 Tubes Desk Clock + Case + Power Supply + Remote + RGB" is in sale since Wednesday, December 19, 2018. This item is in the category "Home & Garden\Home Décor\Clocks\Desk, Mantel & Shelf Clocks".The seller is "kamalabs" and is located in Sarapul. This item can be shipped worldwide.