Github at the "NixeTubesShieldNCS314" repository. IN-12 Nixie Tubes - 6pcs (optional, choose in selector). NE2H-1 Neon Lamps for Dots - 4 pcs.Arduino Control Board (optional, UNO or MEGA). GPS Receiver - (optional, choose in selector). IR Remote - (optional, choose in selector).
Set of Socket pins for 6 IN-12 Nixie Tubes (72 pcs). Set of hex spacers and screws.
Clear Acrylic Stand for NCS312 Shield. Power supply (12V/1A) (optional AC plug US EU UK AU).
User Manual on vintage-style paper. Shield NCS312 with IN-12 Nixie Tubes and NE2H Neon Lamps. And upload software into your arduino. Easy to build beautiful clock - we offer housing. Easy to customize firmware under Your own needs, thanks to an open platform - Arduino.The latest version of the firmware always available on GitHub. No need to download drivers - we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Very high qualty of Printed Circuit Boards. If you have ANY questions. Shiled support 6 IN-12 Nixie tubes [hh:mm:ss]. Temperature display (DS18B20) [Celsius or Fahrenheit]. GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included). Operation via IR remote control (Remote control Sony RM-X151, not included).
No need refresh or update information on the tubes. The maximum possible brightness of the tubes. Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE.
Power On Self-Test (POST): LEDs test, tubes test, sound test. Integrated High Voltage Power supply: 150 - 220V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits.RTC (Real Time Clock) High precision time chip DS3231 with Backup battery. Acquiring time via external GPS module (only with Arduino Mega).
3 buttons on board to control. Potenciometer to adjust High Voltage. IR reciver TSOP4836 for IR remote controllers (may conflict with "Tone" library). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside.Separate controls upper and lower dots. Recommended: 12V, 1-2A (center pin positive +).
Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in). IN-12 Arduino Shield Nixie Tubes Clock on Acrylic Stand. Boards Dimensions in 2D and 3D.Nixie Tubes Clock Shiled for Arduino NCS312. If you have ANY questions, PLEASE ASK us. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA. This item can be shipped worldwide.