DIY KIT for IN-14 Nixie Tube Clock WITH OPTIONS WHITE GOLD BOARD 4 NIXIE TUBES

  

DIY KIT for IN-14 Nixie Tubes Clock with Column White Board with Sockets for 4 Tubes. Project "Divergence Meter mini" DIY KIT for IN-14 Nixie Tubes Clock with Sockets Nixie Tubes Clock with Column on White Gold Board Designed for 4 IN-14 xUSSR Nixie Tubes IN-14 Tubes are the most popular mass-produced Nixie Tubes Nixie Clocks are one of the most beautiful and popular Vintage Clocks Clock features Startup Tune, RGB backlight, USB port for updates Nixie Tubes Clock options include Tubes, Sockets, Column, Power Supply Pluggable Accessories include compact external Temperature sensor Nixie Clock is fully compatible with Arduino platform program codes It allows you to write your own unique programs for the Arduino platform All the latest Source codes are always available on our GitHub channel PCB, Design, Schematics, Case and Software made by GRA & AFCH. Tubes NCT414-4 and Control NCM109 Boards Bare PCBs. Set of Electronic Parts and Components for NCT414-4 and NCM109 Boards.

Set of Hex Spacers and Screws for NCT414-4 and NCM109 Boards. Set of Socket Pins for 4 IN-14 Nixie Tubes (optional, choose in selector). NE2H Neon Bulb for Dot (one Neon for Dot and one spare). IN-14 Nixie Tubes - 4 pcs Set (optional, choose in selector). Column with Dots (optional, choose in selector).

Temperature sensor (DS18B20) (optional, external with jack 3.5 mm). Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector).

Principal Electrical Schemes for NCT414 and NCM109 Boards. BOM Lists for NCT414 and NCM109 Boards. User Manual on vintage style paper. Sockets pins are optional for the Nixie Board. Column with separating Dots is optional for the KIT.

Temperature sensor with jack 3.5 mm is optional for the KIT. Power Supply is optional for the KIT. Nixie Clock support usage of basic Accessory - Temperature sensor. If you have ANY questions, PLEASE ASK us. All our Nixie Tubes Clocks are using HV5122PJ chips, it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1.

We offer flexible Tubes Boards platform, that support many Nixie Tubes (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes). It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks. Fast uploading pf the Firmware via USB to the Control Board.

All the latest version of the Firmware to all our Nixie Clocks are always available on our GitHub channel. No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI), drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux. It is easy to modify the Nixie Clock's Firmware functions for your tasks due to the open Arduino platform. We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic). Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock.

Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing, Tubes flashing and Start up Tune. Our Boards use, Firmware version can be seen at the end of the POST test.

Our Tubes Boards use Unique detailed Tube test - our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures. Clock support many kinds of Nixie tubes (4 tubes [HH:MM] format). Date format: 4 tubes [DD:MM]; 12/24 hour mode. Slot Machine Anti poisoning - tubes saving function. Unique RGB LED backlight with 16,7 million colors.

Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You.

Easy updating firmware via USB using Arduino IDE. Software based on Arduino Sketch, so MCU has Arduino bootloader within. Power On Self-Test (POST): LED backlight, tubes and sound.

You can check firmware version at the end. Unique detailed tube test - our soft check each segment on every lamp. Distinguishable to see segment failure. Clock preserve the time while power is off.

All settings are stored to non-volatile memory! Integrated High Voltage Power supply 150 - 220V. ICSP connector for flashing Arduino Bootloader to blank MCU.

3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual). Test points for testing, adjust and control low and high voltage circuits.

Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. Terminals for external and internal buzzer.

2 dots Column (digits separator) with independent controls for upper and lower dots. Power consumption: 11-14V, 360mA (Recommended: 12 VDC, not less than 1A). NCM109 MCU board size: 100 x 50mm W. NCT414 Tubes board size: 200mmx50mm.

The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631; xUSSR's types: IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17. To use this tubes you need appropriate tubes PCB(s).

Reference pictures of the KIT. Actual photo of the NCT414-4+NCM109 DIY KIT. NCT414-4 bare Board top side. NCT414-4 bare Board bottom side. NCT414-4 assembled Board top side.

NCT414-4 assembled Board bottom side. NCM109 bare Board top side. NCM109 bare Board bottom side. NCM109 assembled Board top side. NCM109 assembled Board bottom side. Boards 2D and 3D views and dimensions. NCM109 Board 2D view top side. NCM109 Board 2D view bottom side. IN-14 Nixie Tubes Clock DIY KIT NCT414-4 and NCM109 Boards BOM Lists. NCT414-4 Tubes Board Bill of Materials List. NCM109 Control Board Bill of Materials List. IN-14 Nixie Tubes Clock DIY KIT NCT414-4 and NCM109 Boards Electrical Schemes.

NCT414-4 Tubes Board Principal Electrical Scheme. NCM109 Control Board Principal Electrical Scheme. IN-14 Nixie Clock with Column and Sockets by GRA & AFCH.

IN-14 Nixie Tubes Clock without Column without Sockets. IN-14 Nixie Tubes Clock with Column without Sockets. IN-14 Nixie Tubes Clock without Column with Sockets. IN-14 Nixie Tubes Clock with Column with Sockets.

This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in this country: UA.

This item can be shipped worldwide. sensor: YES

Tubes: NO

Power supply: US

Sockets: NO

Column: NO

Shape: Rectangular

Model: IN-14 Nixie Clock

Character: Nixie Clock

Country/Region of Manufacture: Ukraine

Department: no

Style: Vintage/Retro

Custom Bundle: No

Item Height: 78

Item Width: 50

Product Line: Nixie Tubes Clock

Material: Glass

Theme: Art

Original/Reproduction: Original

Movement: Quartz (Battery Powered)

Power Source: Electrical

Type: Electronic Alarm Clock

Features: 12 Hour Display, 24 Hour Display, Alarm, Color Changing, Day/Date Display, Non-Ticking/Silent Sweep, Silent/No Ticking, Temperature Display

Smart Home Protocol: no

Color: White

Year Manufactured: 2021

Finish: White

Item Length: 200

Frame Material: Glass

Room: Laundry/Utility Room, Playroom, Bathroom, Bedroom, Dining Room, Garage, Hallway, Home Office/Study, Kitchen, Living Room, Porch, Sunroom

Character Family: IN-14 Nixie Clock

Engraved: Yes

Brand: GRA &AFCH

Number Type: Arabic Numerals

Era: 21st Century (2000-now)

Display Type: Nixie Tube

Modified Item: No