Acrylic IN12 Glow Tube Nixie Clock 225 Colors Light Display USB Powered

  

Acrylic IN12 Glow Tube Nixie Clock 225 Colors Light Display USB Powered. Product Description: IN-12 digital tube fluorescent digital clock, 225 color lights display time and date Specification: Name: IN12 digital tube clock Style: with tube Working voltage: DC 5V (USB-C interface) Material: high-grade acrylic Lamp model: IN12 Size: 11.54.54.5cm Feature: 1.

Time display: hours, minutes and seconds time display. Date display: year, month, day date display. High-precision clock: Built-in high-precision clock chip, the annual error is less than 1 minute. Power-off memory: Power failure or shutdown does not the clock timing.

No need to reset the time after powering on or starting up. Infrared remote control: Use the matching infrared remote control to set up.

Anti-poisoning procedures: When the cathode is ignited, some substances will radiate outward and deposit on other unignited cathodes, preve nting normal glow discharge. In general, if each cathode is cycled and lit for a similar amount of time, the lamp will have a longer life. Therefore, an anti-poisoning procedure is added to light the cathode at regular intervals to extend the life of the lamp.

Low power consumption: Using high-efficiency power supply, the power consumption is controlled at about 1W. Guide: Button corresponding functions: CH-: on/off Previous article: Switch the bottom ambient light color EQ: Enter setting time mode 1: Minutes and seconds display mode 2: Hour and minute mode 3: Display month and date 4: Display year 5: Test the digital tube Time setting : 1. Press the EQ button, the digital tube at the minute position starts to flash, and it enters the time setting mode. You can the value by pressing + or. Continue pressing EQ to set the next item.

The sequ ence is minute-hour-day-month-year, and finally press EQ to exit the setting mode. Press key 6, the digital tube starts to flash.

First set the minutes, use + or - to the value, then press the 6 key to set the hour. After the setting is completed, press the 6 key again to exit the setting timing mode.

Press key 7, the digital tube starts to flash. First set the minutes, use + or - to the value, then press the 7 key to set the hour. After the setting is completed, press the 7 key again to exit the set timer shutdown mode.

The default is 00:00, which means the timer switch is turned off, so if you for want to set the 00:00 switch, please set it to 23:59 or 00:01. Set the ambient light brightness and mode: 1.

Press the 9 key, the digital tube starts to flash, use + or - to the value, 00 is the breathing light mode, 01 is the spectrum cycle mode, then press the number 9, the left digital tube starts to flash, use + or - to the atmosphere light Brightness, 0 means turn off the backlight. In non-setting mode, use NEXT to the color of the bottom ambient light. The 255-color version can be changed by long pressing. Set the detoxification execution interval: Press the 8 key to enter the detoxification execution time interval setting, press the + or - key to set, and press the 2 key to exit after the setting is completed. Package Included: 1 x Digital tube clock with tube 1 x remote control 1 x stand Note: 1.

The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. Also, the each additional item means. The the same color and size.

Transit time may be a little delayed because of the. If you have any questions.