PCB design, schematic, case and software made by GRA & AFCH. Nixie Clock Shield NCS314 with Arduino Uno/MEGA, is integreted with Acrylic Case.
It allows you to write your own unique programs on the Arduino platform, the latest sources are always available on. Shield Board NCS314 for NIXIE CLOCKS. (Universal Manual for NIXIE Tubes Clocks). 3D model in STEP format. Acrylic Case with Shield NCS314 and Arduino UNO/MEGA board 1pc.
Free of charge, type AC plug [US/ EU/ UK/ AU] 1pc. User manual on vintage-style paper 1pc. This listing does NOT contain GPS, Remote.
If you have ANY questions. 6 digits IN-14 Nixie tubes [hh:mm:ss]. Date format: DD:MM:YY. The maximum possible brightness of the tubes.
Slot Machine Anti poisoning tubes saving function. Temperature display [Celsius or Fahrenheit] (optional, choose in selector).GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector). IR remote controls (Remote control model Sony RM-X151/RM-X153, optional, choose in selector).
IR protocol SIRC or any protocol if you able to implement it. Automatic update information on the tubes.
Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it.
Or you have option for a cyclic full spectrum color change! Switching on/off LED backlight in the matter of seconds.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test our soft check each segment on every lamp. Distinguishable to see segement failure. Integrated adjustable High Voltage Power supply: 150 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting and controlling low and high voltage circuits.
Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control. IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA works fluently.Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. Places for 2 column with 2 neon dots inside.
Separate controls upper and lower dots. Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive +).Nixie Tubes Clock IN-14 size: 240(L) x 90(H) x 70(W) mm. Easy to build beautiful clock we offer case. Easy to customize firmware under Your own needs, thanks to an open platform Arduino. The latest version of the firmware is always available on GitHub. No need for additional drivers we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. See our video presentation of Nixie Clock on IN-14 tubes by GRA & AFCH. Nixie Tubes Clock in economic Acrylic Case Photo Gallery.
Nixie Tubes Shiled NCS314 Electrical Scheme. After payments received and verified. The item "NIXIE Tubes Clocks IN-14 in Acrylic Case Option IR Remote, GPS and Temperature" is in sale since Monday, October 30, 2017. This item is in the category "Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Parts & Accessories\Vintage Tubes & Tube Sockets".
The seller is "gra_and_afch" and is located in Dnipro. This item can be shipped worldwide.